[Feature request] Custom PowerShell script: increase timeout
Hello, I was advised to go here after chatting with support. I have run into an issue where our custom PowerShell script runs into the hardcoded 120 second timeout. We're initially testing it first via the Test button. The error after exactly 120 seconds is: “"Test script failed - no response was received from the Collector"”. The script runs okay in PowerShell 5.1, but it averages around 2,6 minutes. We have already cut the runtime down from around 4 minutes to 2,6 minutes and that's the best we can do. It starts generating “Write-Host” data within 50 seconds for each object. We are pulling data from public API endpoints and perform some logic for 2 large arrays. The script will run against a dedicated collector. Issue is in the sandbox as well as in the production environment.Solved73Views13likes7CommentsPublic DNS resolution monitoring
Newbie to LM and have been asked for a method to monitor Public DNS A,MX,PTR record monitoring for a number of DNS Zones e.g. customer1.domain.com, customer2.domain.co.uk. I know I do a powershell command resolve-DnsName <domain> -Server <Target DNS Server> -Type <A etc> and get the correct output. What I do not know is how to turn this into a datasoure and use properties to pass in the domains and record types. Has anyone got some scripts and examples I can use to create a datasource in LM please. Much appreciated if you could helpSolved85Views11likes4Commentssuggtion: Veeam monitoring via REST API
hi, the doco for monitoring Veeam says that only Veeam Backup Viewer access is required, but Backup Administrator is actually required when using the underling PowerShell module. The REST API doesn't require admin privileges, may i suggest updating the LogicMonitor module for Veeam to use the API? https://www.logicmonitor.com/support/monitoring/backup-and-replication-systems/veeam-backup-replication-monitoring https://helpcenter.veeam.com/docs/backup/powershell/getting_started.html https://helpcenter.veeam.com/archive/backup/120/vbr_rest/reference/vbr-rest.html27Views8likes2CommentsCIENA MCP - API Datasource
Hello, Has anyone built a datasource to pull in Alarms data from CIENA MCP? I see that Ciena has a well-defined API page for the MCP. I only see references to the Ciena Wave Server and an SNMP OID identifier. Nothing specific to MCP. Please let me know if someone has something or is working on. Figured I ask before we start to dig into this. Thanks! in advance. /DanSolved29Views8likes3CommentsBGP Description
The Datasource BGP- shows per BGP instance a Description based on snmp OID 1.3.6.1.2.1.15.3.1.1 which is the bgp peer identifier. That is not the actual description that's configured in the switch. Here is an example ofBGP configurations. address-family ipv4 vrf t01-WAN bgp router-id 11.226.11.2 network 10.251.0.0 mask 255.255.255.0 network 10.251.1.0 mask 255.255.255.0 network 10.251.2.0 mask 255.255.255.0 neighbor 10.228.3.53 remote-as 65500 neighbor 10.228.3.53 description t01 wan koppeling naar rack z1.3.23 neighbor 10.228.3.53 password *********** neighbor 10.228.3.53 activate neighbor 10.228.3.53 soft-reconfiguration inbound neighbor 10.228.3.53 prefix-list t01-WAN-IP-BLOKKEN out neighbor 10.228.3.53 maximum-prefix 200 50 exit-address-family address-family ipv4 vrf a07-GTT-sip bgp router-id 11.226.11.2 network 10.100.128.16 mask 255.255.255.240 neighbor 10.100.128.1 remote-as 65135 neighbor 10.100.128.1 description a07 gtt euro fiber neighbor 10.100.128.1 password ********* neighbor 10.100.128.1 activate neighbor 10.100.128.1 send-community neighbor 10.100.128.1 prefix-list a07-TO-GTT out exit-address-family A snmpwalk on SNMP OID 1.3.6.1.2.1.15.3 doesn't show the neighbor description. How can we get the bgp neighbor description into the LogicMonitor BGP instance description ?23Views6likes1CommentImport/Export datasources between production and sandbox
Hi All, We’ve created / altered a ton of datasources through time. After all this time, we would like to sync our datasources from production to the sandbox environment. After a short chat with Support, there is no easy solution for this if i don’t want to publish all datasources. Does anyone have an idea to resolve this? If not, it seems this feature would be great to have.Solved55Views5likes2CommentsComplex Groovy DataPoint access to Script/Batchscript output
I need access to Script/Batchscript output in a Complex Groovy DataPoint. This isa rather fundamental omission. It should be trivial to permit the output[“datapoint”] approach supported for other collection types. Make it so!Solved84Views5likes8CommentsUNC Path ability to impersonate specific user
Hello, As an MSP we've the need to monitor a lot of directories/shares for the same client. Some of those shares are accessible with the collector user, however, we've some clients that restrict their share to specific users (not the ones running the collector service). I've tried to create a datasource that's a simple runas where we can pass the user/passwd as a parameter, however, that isn't possible to run from the collector level (confirmed by LM staff in a case that I've raised). Can this be implemented? This feature would be very important (since we monitor +100 clients).4Views4likes4CommentsAbility to group interface instances
Hello, We would like to have the possibility of group interface instance(s) [from different devices/clients]. As an MSP we have the need of creating common thresholds for certain types of interfaces we want to group, reports, dashboards, etc... Within LM we aren't able to group instances from multiple devices/clients. Can this be implemented? Regards,0Views3likes1Comment