Anyone know of a way to monitor for SNapshot age on a Hyper-V machine?
We have some checks that monitor our VMWare system for Snapshots. Once they are over 72 hour old, we get an alert. I haven’t been able to find a way to do the same thing for our Hyper-V servers. Does anyone happen to know if that’s possible? I didn’t see anything in the Exchange but just through I’d ‘check in case someone knew of anything. I can pull the data with Powershell via the get-vm|get-vmsnapshot command. Not sure if that’s usable in LM somehow. Thanks.How can I tell what's been customized on a DataSource?
Hi, When I look at the toolbox area, the datasources have an icon that tells me if it's been Customized. How can I tell What has been customized if there aren't any notes in the Local History section? Is there a way to do a comparison between the original somehow if there's no update available for me to compare to? Thanks.
DataSource PowerShell Active Discovery and Collector scripts
Hello LM Community! I am trying to configure a new DataSource that uses PowerShell scripts for both Active Discovery and Collector Attributes with the end goal being to populate the discovered devices/instances with data. My Active Discovery script is as follows (I've left out the functions that generate bearer tokens and make the MS Graph calls). $tenantID = '<tenantId>' $appID = '<appId>' $appSecret = '<appSecret>' $appCredentials = New-Object System.Management.Automation.PSCredential($appID, (ConvertTo-SecureString $appSecret -AsPlainText -Force)) $authToken = Get-MSGraphAuthToken -Credential $appCredentials -TenantID $tenantID $resourceURL = "https://graph.microsoft.com/v1.0/servicePrincipals" $applications = (Invoke-MSGraphQuery -method GET -Uri $resourceURL -token $authToken -Recursive).value | Where-Object {$_.preferredSingleSignOnMode -eq "saml"} foreach ($application in $applications) { Write-Host "$($application.appId)##$($application.appDisplayName)" } This successfully imports all of the instances as I would expect with their respective 'appId' and 'appDisplayName'. These can be seen under the Resources tab in LM. My Collector Attributes script is as follows (again functions left out): $tenantID = '<tenantId>' $appID = '<appId>' $appSecret = '<appSecret>' $global:appCredentials = New-Object System.Management.Automation.PSCredential($appID, (ConvertTo-SecureString $appSecret -AsPlainText -Force)) $global:authToken = Get-MSGraphAuthToken -Credential $appCredentials -TenantID $tenantID $resourceURL = "https://graph.microsoft.com/v1.0/servicePrincipals" $applications = (Invoke-MSGraphQuery -method GET -Uri $resourceURL -token $authToken -Recursive).value | Where-Object {$_.preferredSingleSignOnMode -eq "saml"} $todayDate = Get-Date foreach ($application in $applications) { $expirationDate = $application.keyCredentials.endDateTime[0] | Get-Date -Format yyyy-MM-dd $daysToExpiration = (New-TimeSpan -Start $todayDate -End $($application.keyCredentials.endDateTime[0])).Days $data = [PSCustomObject]@{ appId = $application.appId expirationDate = $expirationDate daysToExpiration = $daysToExpiration } | ConvertTo-Json $data } When I test this script, I select the Device to run it from and the Instance to run it against. The output contains the 'appId', 'expirationDate' and 'daysToExpiration' properties of all the instances, and not just the instance I want to match the latter two data points to. This would be as expected when looking at the script, but not what I want to achieve. I don't understand how the Collector script is supposed to match the values of the properties to their respective Instances. Could someone please explain this to me? I then want to interpret the output with a JSON parser, so I have some JSON Datapoints configured to pull in the desired 'expirationDate' and 'daysToExpiration'. For example: Interpreter: JSON JSON Path: $.daysToExpiration This appears to only work for one of the properties but not both. I have read other articles and documentation that mentions key pairs, but ideally I would like to stick with JSON.
Tesla Motors LogicModule Suite
I previously published a datasource for Tesla Motors Battery Statistics - which presents compelling vehicle battery and charging information that is fetched from the Tesla REST API. To complement those efforts, I've written a few other Tesla Motors LogicModules that return a variety of different, but still interesting, datapoints - including a ConfigSource that displays configuration information about the vehicle itself (are the doors locked? Is the sunroof open?) The following is a list of all the Tesla Motors LogicModules now available (see the above-linked post for additional info on how this all works.) DataSource 'Battery Statistics' tracks battery and charger performance and health metrics Tesla Motors Battery Statistics previously posted to the Exchange but included here for sake of keeping everything together.) The datasource name is TeslaMotors_BatteryStatistics and has lmLocator DXLLKY. DataSource 'Climate Statistics' tracks inside and outside temperatures, as well as driver and passenger temperature settings. The datasource name is TeslaMotors_ClimateStatistics and has lmLocator YZRWXC. ConfigSource 'Car Configuration' collects textual configuration data, cleans it up and makes it easily readable (screenshot attached.) The configsource name is TeslaMotors_Configuration and has lmLocator GRY9AE. DataSource 'Location Data' tracks compass heading, latitude and longitude, and power. The datasource name is TeslaMotors_LocationData and has lmLocator AYWYWA. DataSource 'Odometer Reading' does exactly what you might expect. The datasource name is TeslaMotors_BatteryStatistics and has lmLocator HHJRDparam not found error in datapoint mapping
Hello, I am new to LogicMonitor and need some help. I was working on creating a datasource where the groovy script returns line based output like: QueueDepth.Queue_Name_1=24 QueueDepth.Queue_Name_2=20 The datapoints are created like: Queue_Name_1 → Key- ##WILDVALUE##.Queue_Name_1 Queue_Name_2 → Key- ##WILDVALUE##.Queue_Name_2 However, when the data gets polled, it is unable to retrieve it: NaN param not found in output - (method=namevalue, param=.Queue_Name_1) Can someone please let me know what I am missing here. Regards, ShivamBGP Description
The Datasource BGP- shows per BGP instance a Description based on snmp OID 1.3.6.1.2.1.15.3.1.1 which is the bgp peer identifier. That is not the actual description that's configured in the switch. Here is an example of BGP configurations. address-family ipv4 vrf t01-WAN bgp router-id 11.226.11.2 network 10.251.0.0 mask 255.255.255.0 network 10.251.1.0 mask 255.255.255.0 network 10.251.2.0 mask 255.255.255.0 neighbor 10.228.3.53 remote-as 65500 neighbor 10.228.3.53 description t01 wan koppeling naar rack z1.3.23 neighbor 10.228.3.53 password *********** neighbor 10.228.3.53 activate neighbor 10.228.3.53 soft-reconfiguration inbound neighbor 10.228.3.53 prefix-list t01-WAN-IP-BLOKKEN out neighbor 10.228.3.53 maximum-prefix 200 50 exit-address-family address-family ipv4 vrf a07-GTT-sip bgp router-id 11.226.11.2 network 10.100.128.16 mask 255.255.255.240 neighbor 10.100.128.1 remote-as 65135 neighbor 10.100.128.1 description a07 gtt euro fiber neighbor 10.100.128.1 password ********* neighbor 10.100.128.1 activate neighbor 10.100.128.1 send-community neighbor 10.100.128.1 prefix-list a07-TO-GTT out exit-address-family A snmpwalk on SNMP OID 1.3.6.1.2.1.15.3 doesn't show the neighbor description. How can we get the bgp neighbor description into the LogicMonitor BGP instance description ?Oracle jdbc JAR file update
LogicMonitor's collector utilizes an outdated version of the Oracle JDBC jar file. It's essential to upgrade to the most recent version available in the Maven repository to take advantage of new secure database connection types. However, users should note a significant change in behavior with the new jar: while the old version automatically closed abandoned Oracle database connections, the new version does not, potentially leading to an excessive number of open connections. This surge in open connections can overload and crash an Oracle server where connections aren’t limited by user. Therefore, clients must either ensure that customizations explicitly close database connections or adjust their server settings to impose limits on the number of concurrent open connections. All of the newest Logicmonitor datasources properly close connections but some of the older modules did not do this. Logicmonitor has created a module to test for this problem and alert if it occurs. Oracle_Database_MonitorUser will keep track of the number of connections in use by the monitoring user and alert if the number of connections is too high. This update is scheduled for collector 35.400. Make sure this module is installed before upgrading to collect 35.400 and monitor your database connections before rolling this out to general release.Can I set a different threshold for C drive from D or E drive space?
Hi, Our Windows servers have the standard alerting based on Volume Capacity. When Used Percent gets to 90%, we get a warning, 95% error, etc. How could we change this so that the C drive uses a different set of thresholds than the D drive? Can we do that within the basic DataSource or would we have to have one DataSource that just checks C and one that just checks D? I don’t want to clutter everything up, but if this is easy to do, it would come in handy. Thanks.