How to creat a custom report to find out what devices are currently in SDT
I want to create a report regarding all devices that have been out into SDT in the last month. When I check the Reports secion in LM andSelectReports | Add | Report.it gives me the following Report types: Can anyone advise which would be the best Report type to use for generating which devices have been in SDT over the last month?Solved240Views14likes3CommentsSDT UIv4 after winter time
We are experiencing a very weird bug with the SDT function in UIv4. When selecting any date before “winter time”start, it works just fine (as long as we use 12H format…Why can’t we choose between 12 and 24?). Also UTC shouldn’t be affected by winter time. Here you see that we can easily put an SDT as expected When trying to put an SDT after winter time starts (29th of October) we are unable to directly write the time, like we did in the gif above. When trying to write 10:00 it just increases the number until it changes the date and we have to go back to select the right date. Also we get an error saying that the format must be HH:MM, which it clearly is but we are still not allowed to put an SDT on it in UIv4. All of this works just fine in UIv3.86Views1like2CommentsAnsible Time Zone Support
Hello! I currently use Ansible to schedule a task which updates Windows on the servers we manage, roughly 300 in Azure. These servers are spread throughout the world in many different time zones. In my playbooks for configuring the “patching task”, I would like to set a SDT in Logic Monitor. Currently there is no “time zone” setting with the Logic Monitor Ansible module. I’m sure I could get around this by doing some sort of math on the date / time within the SDT playbook. Does anyone do anything like this? Some other notes about our setup: We have a mix of Windows Server 2022 and Windows 11 VMs Azure Automation / Update Management does not support Windows 11 VMs Time zones on the servers are local to the region they are deployed in Our patching schedule is … staging 1 week after “patch Tuesday” production 2 weeks after “patch Tuesday” Because of this, reoccurring SDTs need to be reconfigured twice a year, say when the first of the month falls on a Wednesday Sometimes patching needs to be rerun, so it would be nice to SDT the servers / device groups whenever needed Thanks! Jerry37Views3likes0Commentsneed better SDT support for website checks
At this time, you can schedule SDT for website checks from one or more (or all) locations, but you cannot specify which test is in downtime (like you could for a resource datapoint). As a result, if I want to pause SSL expiration warnings, I must also pause ALL checks against the site, which far from ideal. Please fix SDT for website checks to allow selection of all alertable criteria.25Views12likes1CommentAlert Suppress
Is there any feasibility do not monitor the particular process, example, there is backup job running on the server and due to on this , the CPU and memory process goes to High and getting many alerts in LM. instead of using SDT Mode, if there any possible do not monitor particular process.Solved220Views1like10CommentsSDT Duration calculation off
It’s hard to know if this is an issue with v4 or if it was happening the whole time. However, it’s easy to see that it’s wrong now. When we set permanent SDT on something, we typically just change the first digit of the year from a 2 to a 3. Meaning, we change the SDT so it ends 1000 years in the future. In the old UI, it would calculate the duration of the SDT and show it in minutes and seconds. The new UI adds years, months, days, and minutes (at least). For one SDT i just set from 2023-03-23 02:11 PM EDT to 3023-03-23 02:11 PM, the new UI shows 1000 years, 8 months, 2 days, and 59 minutes. Unless there’s going to be a new ceasar and a new calendar (possible), I don’t know why it has anything other than 1000 years exactly. Where did the 8 months, 2 days, and 59 minutes come from? For reference the old UI shows 365242 days 59 minutes. I get the 365000 days, +/- a few for leap day anomalies. But even in the old UI, where did the 59 minutes come from?34Views1like0CommentsDatasource SDT and REST API
I’d like to write a script to accomplish what we can do in the GUI when creating a new SDT, which is to find a datasource and create a global SDT applied to it. The REST API v3 shows me that we can only create a DeviceDatasourceSDT, which seems to require the device Id of every resource where the datasource has been applied. This doesn’t make sense. It seems in order to SDT a datasourcein the same way the GUI allows us to do, we must iterate through every single resource and their respective device datasources, locate ones that match the datasource I’d ilke to SDT, then SDT each of the corresponding device datasources. This is madness. Has anyone accomplished anything useful with a datasource SDT using the REST API?156Views1like3Comments