6 polls, 5 poll cycles, or 12 minutes
Alright, take a look at this. The poll rate for this DS is 2 minutes. What is the trigger window? Assume all the criteria is met starting a 1:59PM and 30 seconds (between polls). When will the alert be triggered? It’s actually 10 minutes (2:10 PM, +/- a couple seconds for collector task queue delay and assuming original scheduling at the top of the hour). Do you know why?Why does it say 12 minutes? Why not 10? Is this behavior different than regular alert trigger intervals?Solved63Views2likes3CommentsThreshold Duration
Hello, I was wondering if there was a possibility to impose a duration constraint on a threshold in LogicMonitor... I see where you can enable dynamic alters but was not sure if they would look back to the duration of the alert rather than just a floating data point that it would attempt to normalize. Thanks in AdvanceSolved18Views0likes1CommentAlert Test Report
I started a chat under ticket 119191 and discussed this with Seth. I would like you to consider this for your next roadmap. I want to be able to see what alerts "would fire" without enabling the alerts. Scenario: Onboarding 10 new devices to a new group with alerting disabled. I want to QUICKLY see how many would fire if I enabled them. No hunting, no slowly turning each one up one by one to prevent the new alert deluge. Maybe a report with applied thresholds and current values with clear indicators what alert level the value is within at the report runtime.7Views0likes3CommentsAlert Test Report
I started a chat under ticket 119191 and discussed this with Seth. I would like you to consider this for your next roadmap. I want to be able to see what alerts "would fire" without enabling the alerts. Scenario: Onboarding 10 new devices to a new group with alerting disabled. I want to QUICKLY see how many would fire if I enabled them. No hunting, no slowly turning each one up one by one to prevent the new alert deluge. Maybe a report with applied thresholds and current values with clear indicators what alert level the value is within at the report runtime.3Views0likes0CommentsDEVIATION FROM ROLLING AVERAGE
I see a need in the design to alert on deviation from rolling average: example 1: Temperature in hardware is based on fixed baseline (default or manual adjusted) or based on fixed Delta. In real world application it would Make a LOT more sense to alert on Deviation from a 5 day or 30 day rolling average Temp of the box. Reason is, units alarm on the weekends because the office shuts off the AC during the summer. or they alert During the week 9-5 because in the winter the offices crank the heat. All of these ignore nuance of RANGE and Average expectation for the location...The alerting should just be how FAR outside the average Range for the site is. My Nashville facility hovers from 56 to 59 all week. I have it set on 57 so I get alerts at least once a weekend. I could move it to 59...but that's a band-aid. The REAL solution would be to have the software TRACK the last 30 days, and alert when we're outside the NORM for that location. furthermore....with hardware it is not the specific temps that kill the hardware....its the RATE at which the temp changes. so, the alerts SHOULD be based on the average range the system has seen in the last 30 days, and alert ONLY when the rate of change accelerates...but I imagine THAT request would be more challenging to reduce to an algorithm. Example 2: PING times.....I have sites where the Latency range is EXTREME (Mumbai, Johannesburg, Taipei etc...) I'd wished the PING would track the 30 day range and common deviation from norm and alert when the sites see latency that is way outside the expected fluctuation range. 30ms typical 90% of the time + 200-500ms spikes 10% of the time. when Ping times hit 300 ms for more then 10% of the last hour of sampling....then notify warning to inform of change in TREND....not fixed threshold in immediate sample20Views3likes1Comment
REST API - ability to retrieve effective threshold for a given instance
I'm attempting to create a report for our management that would show hostname, winvolume usage instances, capacity of volume, current usage of volume, percent used of volume, groups host belongs to, current effective threshold (global/group/host/instance), current severity of alert (if any), alert acked, instance in sdt, alerting disabled effectively (group/host/instance) Most of that is retrieved relatively easily, except for effective threshold. Can that be added to the api?6Views0likes1Comment