Querying alerts via API

Thanks both for your help, appreciated. Thought it was just me but good to know it wasn't.

From what see ~ operator is for "includes" so I've always used it for substring/wildcard matches. There is a way to do list-like filtering actually (see a href="https://communities.logicmonitor.com/topic/1709-get-lm-devicegroup-properties-rest-api/#comment-4129" rel="">https://communities.logicmonitor.com/topic/1709-get-lm-devicegroup-properties-rest-api/#comment-4129) but I can't get that work with with alerts right now; it might be specific to properties though. Also the alert endpoint is kinda weird in that is works a bit differently than other API calls, like how the the "total" can be a negative number.

May also be worth looking at an older forums post that talks about some oddness with multiple filters and ~ operator: a href="https://communities.logicmonitor.com/topic/2153-how-to-use-the-~-includes-filter-operator" rel="">https://communities.logicmonitor.com/topic/2153-how-to-use-the-~-includes-filter-operator

Ok, was just forced to look at this for someone else and I couldn't get any filter to work using APIv2 (not sure why).

Also, the filters can only be applied on non-list fields in the response json. So, given the response:

{
  "items": [
    {
      "SDT": {},
      "ackComment": "string",
      "acked": true,
      "ackedBy": "string",
      "ackedEpoch": 0,
      "alertValue": "string",
      "chain": "string",
      "chainId": 0,
      "clearValue": "string",
      "cleared": true,
      "customColumns": {},
      "dataPointId": 0,
      "dataPointName": "string",
      "detailMessage": {},
      "endEpoch": 0,
      "id": "string",
      "instanceDescription": "string",
      "instanceId": 0,
      "instanceName": "string",
      "internalId": "string",
      "monitorObjectGroups": {},
      "monitorObjectId": 0,
      "monitorObjectName": "string",
      "monitorObjectType": "string",
      "nextRecipient": 0,
      "receivedList": "string",
      "resourceId": 0,
      "resourceTemplateId": 0,
      "resourceTemplateName": "string",
      "resourceTemplateType": "string",
      "rule": "string",
      "ruleId": 0,
      "sdted": true,
      "severity": 0,
      "startEpoch": 0,
      "subChainId": 0,
      "threshold": "string",
      "type": "string"
    }
  ],
  "searchId": "string",
  "total": 0
}

You should be able to write a filter like this:

/alert/alerts?filter=monitorObjectName~domain.com

The documentation states that you should be able to use the ~ operator for "contains", however in my testing, it seems that ~ (contains) behaves exactly the same as : (equals). If this is also your experience, I suggest you open a case with support as it's not working as documented.

Hey, oh ok thanks for clarifying. 

Oh that is really helpful. I was looking around in the portal to see if that was an option to show the API calls so that helps a lot. Thank you

I don't think you can directly filter out by resource group using the /alert/alerts/ filter, as the group name is contained within the monitorObjectGroups list/array within the results. But you should be able to save the results from all alerts then filter the results within your code. BUT if your looking for all the alerts for a particular resource group, you can use a different endpoint /device/groups/{id}/alerts/.

One tip about the API is that the portal itself used the API. If you bring up the browser developer console (F12) and go to the Network tab, and click around, you can see the API calls that the portal uses. For example you can click on the Alert tab for a group and see the /device/groups/{id}/alerts/ call.

No problem, thanks for your help.

Thanks for the info, it doesn't seem to work for me unfortunately. It seems display every single alert for every customer no matter what I put. E.g.

#Request Info
httpVerb ='GET'
resourcePath = '/alert/alerts'
queryParams ='?v=2&?filter=displayName~domain.com' (I changed domain.com to the actual customer)
data = ''

I wasn't using the v2 API before but I was trying that as well above. 

Are there some working examples documented anywhere?

For the v2 API, does it display the data any different or is the only difference no support for basic auth?

Thanks

1 minute ago, MrJ said:

 - Is there a way to retrieve alerts only for a specific folder? We have customers under specific folders.

Yes, you'd use the filter query parameter and the value of the parameter would be system.groups~Clients%2FNameofClient

3 minutes ago, MrJ said:

How would I retrieve alerts with only a specific string in the resource name? E.g. all customer devices will have devicename.domain.com I would like to filter for only alerts of devices with *domain.com* in the resource name.

You'd again use the filter query (not sure if/how to combine this with the above, would have to play with it): filter=displayName~domain.com

4 minutes ago, MrJ said:

- How would you do multiple queries in one API call? e.g. a query with a filter, and a sort?

You'd just pass multiple query parameters:

alert/alerts?filter=displayName~domain.com&sort=+displayName