HSRP state monitoring on Cisco l3 devices
It would be nice to have visibility into HSRP state for Cisco layer 3 devices such as routers and switches. It should work similar to the BGP datasource I imagine.
I've attempted this with...
Forum Discussion
I've created a test DS which polls current state (1-6) from devices and will alert if the delta is larger than 0. This works however the alert will clear automatically after x number of consecutive polls since it looks at the delta vs previous datapoint. Wondering if there's a better way to do this.
here's the OID - .1.3.6.1.4.1.9.9.106.1.2.1.1.15.##WILDVALUE##
