Product Discussions

Ask question, Find Answers, Get Help

  • 858 Topics
  • 3,621 Replies

858 Topics

D
Hypersonic Enthusiast
DominiqueHypersonic Enthusiast
posted in Product Discussions

Add the Friendly Name of a certificate on an Alert Report

Hello, I have the discovery: Quote ##--------------- Discovery ------------------## $pshost = Get-Host              # Get the PowerShell Host. $pswindow = $pshost.UI.RawUI    # Get the PowerShell Host's UI. $newsize = $pswindow.BufferSize # Get the UI's current Buffer Size. $newsize.width = 800            # Set the new buffer's width to 800 columns. $pswindow.buffersize = $newsize # Set the new Buffer Size as active. $newsize = $pswindow.windowsize # Get the UI's current Window Size. $newsize.width = 800            # Set the new Window Width to 800 columns. $pswindow.windowsize = $newsize # Set the new Window Size as active. $readOnly     = [System.Security.Cryptography.X509Certificates.OpenFlags]"ReadOnly" $localMachine = [System.Security.Cryptography.X509Certificates.StoreLocation]"LocalMachine" $store        = new-object System.Security.Cryptography.X509Certificates.X509Store( "\\##SYSTEM.SYSNAME##\my", $l

8
D
Hypersonic Enthusiast
3 years ago
B
bmetcalf
posted in Product Discussions

Report showing datasources/datapoints with critical threshold

It doesn't look like there is a canned report for this and something could be written against the  API I'm sure,  but I'm looking for a way to report on all datasources and datapoints where a critical threshold has been set.  We are essentially trying to determine all datapoints where an alert would route through a particular escalation chain.  Any thoughts on this?  Thanks.

1
mnagel
Atomic Advisor
3 years ago
J
Jeffrey.Young
posted in Product Discussions

Send Notification for SSH Session

Good afternoon all!  Does anyone know of a way to send a notification when a SSH session is started to a Cisco switch?  Ideally the notification would be limited to a particular user...so when user X connects a notification is sent.   Thanks! Jeff

1
A
3 years ago
D
Hypersonic Enthusiast
DominiqueHypersonic Enthusiast
posted in Product Discussions

Access Certificate

Hello, What does this error mean? I am trying to collect the information using the "_SSL Certificates Datasource" Quote ##--------------- Discovery ------------------## $pshost = Get-Host              # Get the PowerShell Host. $pswindow = $pshost.UI.RawUI    # Get the PowerShell Host's UI. $newsize = $pswindow.BufferSize # Get the UI's current Buffer Size. $newsize.width = 800            # Set the new buffer's width to 800 columns. $pswindow.buffersize = $newsize # Set the new Buffer Size as active. $newsize = $pswindow.windowsize # Get the UI's current Window Size. $newsize.width = 800            # Set the new Window Width to 800 columns. $pswindow.windowsize = $newsize # Set the new Window Size as active. $readOnly     = [System.Security.Cryptography.X509Certificates.OpenFlags]"ReadOnly" $localMachine = [System.Security.Cryptography.X509Certificates.StoreLocation]"LocalMachine" $store        = new-obj

1
A
3 years ago
D
Hypersonic Enthusiast
DominiqueHypersonic Enthusiast
posted in Product Discussions

How to get the Certificate Common Name (FQDN) in the alerts description

Hello, I am using the two script from Cole McDonald: On 8/22/2019 at 9:11 AM, Cole McDonald said: I've lightened the load slightly on the winCertCheck (which is technically no longer the same DS as I've replaced the entirety of the scripts with simplified .NET based powershell scripts to avoid using invoke-command which tends to lead to some resource constraint issues.  This should help though, will keep the same instances alive from the old code as the output is identical to the previous version by @Jonathan Arnold: ##--------------- Discovery ------------------## $readOnly = [System.Security.Cryptography.X509Certificates.OpenFlags]"ReadOnly" $localMachine = [System.Security.Cryptography.X509Certificates.StoreLocation]"LocalMachine" $store = new-object System.Security.Cryptography.X509Certificates.X509Store( "\\##SYSTEM.SYSNAME##\root", $localMachine ) $store.Open( $readOnly ) $store.Certificates ` | Select-Object {$_.Thumbprint + "##" + $_.Thumbprin

25
D
Hypersonic Enthusiast
3 years ago
D
Hypersonic Enthusiast
DominiqueHypersonic Enthusiast
posted in Product Discussions

How to remove a device from a Dynamic Group

Hello, How could I remove a device from a dynamic group? Do I have to add a new property? Thanks, Dominique

1
A
3 years ago
DanB
Cobot Collaborator
DanBCobot Collaborator
posted in Product Discussions

Where did the search bar go in the community?

So I cannot seem to find the Search bar anymore in the community here? Was it hidden? If I do a Ctrl+F in chrome and look for "search" it does find something but its hidden it seems. How are we supposed to look for previous threads?  

5
DanB
Cobot Collaborator
3 years ago
D
dan.wiczek
posted in Product Discussions

Clarification on JDBC MSSQL Datasources credentials

Hi All, Having issues setting up the JDBC Mssql Datasources using Windows authentication. Can I use a domain account with necessary sql permissions other than the the account the collector is running for the jdbc mssql datasources?  If yes, what are requirements for properties (jdbc.mssql.user, jdbc.mssql.pass and jdbc.mssql.url? Thanks in advance. Dan  

1
A
3 years ago
O
Owen from Cali
posted in Product Discussions

OpsGenie not acking through to LogicMonitor, when LM is using SSO

Hello, I have an LM installation with an OpsGenie integration. This uses an API to go to OG, which works fine, but the back-channel acking from OpsGenie to LogicMonitor doesn't work, either by the stated UserID and Password, as per the documentation, or via API tokens. The username and password credential works fine when logging into LogicMonitor, and the token method works via a Python script test, but the OpsGenie debug says "authentication failed" It looks like the OpsGenie documentation fails after LM turns on SSO. This has to be a common implementation... Has anyone found out how to make this work? Any tips?  

1
M
3 years ago
S
Santiago Moneta
posted in Product Discussions

checl cisco devices for error disabled ports

Hi everyone, I'm working on getting my Cisco switches monitored and found that I cannot see, at least by default, to logic monitor to alert me when a port is on "error disabled" mode. I found this KB but I'm not sure how to actually create the event that it mentions, may I ask the community for some help? This is the KB I found: https://www.logicmonitor.com/support/monitoring/networking-firewalls/cisco-port-errdisabled/   Thanks!

4
mnagel
Atomic Advisor
3 years ago
M
mgehrmann
posted in Product Discussions

Terraform disable alerts

I have just started deploying to LM using terraform and have found whenever it runs the updated groups have alerts disabled. This is despite the fact I have not set disable_alerting = Should I hard set this key/value to true?

2
A
3 years ago
Z
Zhivko
posted in Product Discussions

RDP monitoring

Hello, I am looking for a way to monitor the RDP connection from one server to another - let say every 10 minutes. I don't want to check if port 3389 is open, etc. but need the LM to actually test the RDP connectivity. I was advised that I need to create a new Data Source which should have auto discovery enabled via Script and also Data Collection. I think for Data collection, I can put a simple power shell script but I don't know what kind of script I need to use for Auto Discovery. I tried without Auto Discovery by putting a line in "applies to" but that Data Source doesn't seem to appear when I click on the resource itself where other Data Sources are like Ping, CPU are (default ones applied when the resource was added to the LM system). if anyone has already configured this, please share how the Data Source should look like. Also how the alerting should be exactly configured so we will receive alerts for RDP failures. Thank you

2
A
3 years ago
Mosh
Hypersonic Enthusiast
MoshHypersonic Enthusiast
posted in Product Discussions

Bug in CSV download from Chart?

Is there a bug in the CSV download option in a chart widget?  If I set the time range to a custom time, say 1st Jan 2019 to now, the chart shows the correct data, but the CSV download only contains the current day's data.

3
Mosh
Hypersonic Enthusiast
3 years ago
M
maxwell
posted in Product Discussions

Doubts

Hi All i have cleared logicmonitor certification but i am not sure for the below answers. please correct me if i am wrong LogicMonitor’s Version2 API cannot be used for which of the following tasks updating netscan ensuring consistency during customer implementations creating role groups automating tedious and repetitive tasks. My Answer: ensuring consistency during customer implementations If an alert rule has *ABCD*|*PQRS/* specified in the Group field of an alert rule, alerts from resources in which of the following groups would match? Select all correct answers. /Customers/ABCD/Routers /Customers/Test PQRS/Network /Customers/PQRS/Linux /Customers/ABCD /Customers/PQRS /Device by Type/Linux Not sure What is the most convenient way to save a complex AppliesTo expression for frequent reuse? Add the AppliesTo expression to an Ops note so you can copy and paste it as needed Add the AppliesTo expression to a new Default Message Template Save the AppliesTo exp

4
mnagel
Atomic Advisor
3 years ago
Vitor Santos
Vitor Santos
posted in Product Discussions

Spanning Tree (STP) - Datasources available?

Hello, I've been searching for Datasources related with Spanning Tree Protocol monitoring but didn't found one. Does this mean there's no out-of-box datasources for STP monitoring? This is extremly useful in terms of monitoring. Appreciate the feedback.

5
Vitor Santos
3 years ago
G
Gary Dewrell
posted in Product Discussions

Exclude self-signed certificates in SSL_Certificate

I need a way to monitor days until expiration for certificates, but I want to exclude self signed. How would I go about doing that?  

5
G
3 years ago
M
Mac
posted in Product Discussions

Reporting APC PDU power usage

I have a client looking to monitor their colo rack power usage and have a monthly report showing consumed power. Ultimately, they want to be sure they are being billed fairly by their hosting data center for the amount of power consumed. the basic Idea is to use the snmp info from the PDU to aggregate the monthly power consumed. Logic monitor has APC PDU data sources that include a "live" view of the amps per phase on the 3 phase PDU Ideally, we want to avoid using APC datacenter expert or the like to manage the data. Has anyone worked on converting the amps to kilowatts and reporting on that directly in logic monitor?

14
A
3 years ago
G
grantae
posted in Product Discussions

Making a Backup for Cisco ISE in LogicMonitor

I am trying to setup a ConfigSource in LogicMonitor for Cisco ISE backups. We want the backup to only pull when a change is made in ISE. The out-of-the-box Cisco_IOS and Cisco_NXOS ConfigSources don't seem to work for ISE. So I tried to make a ConfigSource from the LM page https://www.logicmonitor.com/support/logicmodules/articles/creating-a-configsource but I haven't been able to get it to work properly. I made a copy of Cisco_IOS so I could have the Config Checks and removed the scripts. I have the following: AppliesTo: (     (        startsWith( system.sysinfo, "Cisco Identity Services Engine" )     )    ) &&   (      (ssh.user && ssh.pass ) ||      (config.user && config.pass)  )   Parameters: import com.santaba.agent.groovyapi.expect.Expect host = hostProps.get("system.hostname"); user = hostProps.get("config.user"); pass = hostProps.get("config.pass"); cli=Expect.open(host, user, pass); cli.expect("#"); cli.send

39
G
3 years ago
S
stourigny
posted in Product Discussions

Logic Monitor and MS Teams

LM Community, Is LogicMonitor configurable to monitor Microsoft Teams environments? I use LogicMonitor in the NOC that I am employed. LM works great with our data network clients but we have some UC customer and the tools we use could be a lot better and if LM is compatible it would be a game changer for us!   Thank you in advance for any info! Shawn

1
A
3 years ago
Vitor Santos
Vitor Santos
posted in Product Discussions

Schedule SDT for specific events within a EventSource??

Hello everyone, We've multiple Event Sources setup (each one of them covers multiple events (different sources & event IDs). They're kinda in the same category but they cover different events (example Backup Related Events - within those there's multiple applications, event IDs, etc...). Our question here comes if we need to filter a specific event (within one of those Event Sources) on a specific period of the day. For example, ServerA is returning some events at 2AM EST but those are related with a scheduled job that occurs daily, one of our clients requested us to filter those events (daily from 2AM to 2:20 AM EST).  Is there any way to do an SDT (but with a specific criteria)? Without filtering the whole Event Source (that contains more events that shouldn't be suppressed at that time). The reason we've multiple events within a event source is to don't create a lot of Event Sources (thinking on the WMI usage here). We have multiple events on the same Event So

8
Vitor Santos
3 years ago
J
jcav404
posted in Product Discussions

Syslog for Authentication

Has anyone be able to setup a syslog for cisco devices that captures fail login attempts? 

5
A
3 years ago
Antony Hawkins
LMer
Antony HawkinsLMer
posted in Product Discussions

VMWare Guest OS counts

A couple of DataSources for your vCenters, that will show you counts of VMs per unique OS, or per OS family. They will look a bit like this: just i ...and... With further tweaking you could easily have these specifically pull out and therefore alert on the presence of "out of support" OSs (Windows 2000 and 2003, as per above screenshot!). Interestingly, quite often VMWare will list the family as 'null' while a full OS name is reported. I have no idea why, but that's what comes back from the API. Credentials are the same esx.user and esx.pass that you'll already have set for your vCenters, so just import the LogicModules and they'll apply and work. VMware_vCenter_GuestOSNameCounts: NPPDLT (v1.1.0) VMware_vCenter_GuestOSFamilyCounts: JP3KG6 (v1.1.0)

6
Antony Hawkins
LMer
3 years ago
D
Duncan Wakeling
posted in Product Discussions

Ansible authentication when SSO is enforced?

Anyone managed to get the Ansible module to work when SSO is enforced on the LogicMonitor account? I can use an API key but don't think this is (currently) supported?

1
A
3 years ago
K
Kyle
posted in Product Discussions

Pointing a collector to a synology on the network

Hey all, I have a collector setup on a workstation that is on the same network as the synology, but I am having issues pointing said collector to monitor it instead of the workstation that the collector is installed on. Thanks!

4
K
3 years ago
D
Hypersonic Enthusiast
DominiqueHypersonic Enthusiast
posted in Product Discussions

Properties Content

Hello, I have the four properties  - Application - Owner - Patch Group - Technical Group I would like to have them 1. existing on all devices 2. the values should be mandatory and validated against a list of correct values... list of applications, list of users, list of patch group, list of technical group, ... Is there an easy wahy to do the (1) first and when it will be existing verifying the values (2).  I have see also some typo, misspelling in the property names how to detect them? As it seems all these fields are free for any input it is open to a mess !!! anyway to limit this? Thanks, Dominique

8
A
3 years ago

Badge winners

Show all
Terms & ConditionsCookie settings