Product Discussions

Ask question, Find Answers, Get Help

  • 781 Topics
  • 3,197 Replies

781 Topics

S
Sahir
posted in Product Discussions

DH Key mismatch

Hi, We have updated SSH settings on our CISCO devices to use DH 4096. Now, the collector showing following error message: %SSH-3-DH_RANGE_FAIL: Client DH key range mismatch with minimum configured DH key on server Any idea how to modify DH keys or clear ssh keys on LM side?  Thanks, Sahir

2
S
2 years ago
Jason Fant
Neophyte
Jason FantNeophyte
posted in Product Discussions

Monitor UCCX Backup Status thru SSH

Hello, I have a UCCX Cluster where I want to monitor the backup status.    I've wrote most of the code to SSH into the system and run the command to check the backup status.    The issue I'm having is being able to parse it and alarm on it correctly.     Can anyone help me on parsing out these three fields.....I assume it'd need to be a Key:Value pair but not sure how to do that.   And if I find "SUCCESS", how can I trigger a datapoint threshold?   I assume I have to convert the SUCCESS into a 1 or 0 and alarm on that INTEGER.     def status = command_output.findAll(~/Status:\s(.*)/) { key, value -> value }     def tar_file = command_output.findAll(~/Tar Filename:\s(.*)/) { key, value -> value }     def percentage = command_output.findAll(~/Percentage Complete:\s(.*)/) { key, value -> value }   Here is my Groovy script: import com.santaba.agent.groovyapi.expect.Expect; import com.santaba.agent.groovyapi.snmp.Snmp; import com.santaba.agent.groovyapi.http.

13
Jason Fant
Neophyte
2 years ago
mnagel
Atomic Advisor
mnagelAtomic Advisor
posted in Product Discussions

method to expunge categories no longer applicable?

I have been trying to figure out a way to auto-remove categories added by PropertySources when they are no longer applicable (e.g., when something stops being an IIS server, SQL server, DHCP server, etc.). I have found recently this is an annoying problem as PropertySources-added categories live forever until manually removed and the modules cannot subtract AFAIK. OTOH, the method of adding a category is undocumented -- I only know about it from review of modules provided by LM, so perhaps there is a method that interprets a negation operator (like !) to remove the listed category? I can think of other options, but they would require replicating what a PropertySource does and use the debugger (via API) to change system.categories.  Would prefer to avoid that as it would be pretty complex and using the debugger that way always makes me cringe when I consider the security implications .

2
mnagel
Atomic Advisor
2 years ago
K
Kelly
posted in Product Discussions

Dynamic Group Applies to scripting

When building a dynamic group how can you match on an device property that is being inherited from it's parent static group?  

3
K
2 years ago
D
danielaart
posted in Product Discussions

Looking for montoring of OpenVPN server

Hi, Im looking for some prebuilt monitoring capabilities for OpenVPN server via Logicmonitor. What im looking for is connected clients and maybe some other good information. We currently monitoring Our OpenVPN enviroment with Nagions and NRPE deamon but we want to stop using Nagios and have everything monitored via or Logicmonitor tenant. BR DA

2
mnagel
Atomic Advisor
2 years ago
Vitor Santos
Vitor Santos
asked in Product Discussions

Monitor Linux Processes (via SSH)

Hello, In our current monitoring tool we monitoring Linux processe profiles using a Regex expression to match one or more. Example, we've a profile that will look into processes that contain /.*OpswiseAgent.*/ in their cmdline path. Once those are running, the probe picks them automatically and monitors their state (not actually having the PID in mind because that might change). In LM we would also not rely on PID since it might change (in terms of wildvalue).There can be also more that 1 process (with diff PIDs) running with the same exact cmdline (therefore it needs to pick those in diff. instances). I'm just unsure how to have a working solution having in mind all of this (unique wildvalue & wildalias). Can anyone assist here perhaps? Regards,  

9
Vitor Santos
2 years ago
DanB
Cybernetic Observer
DanBCybernetic Observer
posted in Product Discussions

Is there a way to export data source to a template file; CSV?

So we are in the final phases of rolling out LogicMonitor and now the daunting process of Alert Tuning has rolled upon us. In our old monitoring solution we has it very much tweaked and customized and overall all alerts were around ~400-600ish.  In LogicMonitor we are currently at 13000+. We need to seriously tune up the Datasources and we need a way to show our SME's what each datasource is monitoring and what it alerts on, what thresholds, etc..  Is there a way to export the Datasource's Monitoring Template to a CSV file so that we can reference that and our SME's can then say turn off, adjust etc.. I see in the reports section there is a "Alert Threshold Report" but that lists out every single datapoint instance on a group/resource and we don't want that. We need what the base DS template looks at and uses and applies to each matching resource.    

6
DanB
Cybernetic Observer
2 years ago
M
Mat THorpe
posted in Product Discussions

Arcserve UDP Job monitoring

Hi, I've been asked to see if we can monitor and alert on Arcserve UDP backup jobs. I have very little knowledge of Arcserve.. Has anybody successfully achieved anything like this using LM? Regards Mat Thorpe

1
A
2 years ago
A
Akash Anand
posted in Product Discussions

Network link status dashboard

HI All, Is there any way we can create a network links dashboard(WAN or internet links) in Logic monitor. Basically I am looking for a dashboard with mapping of routers(with shapes) and links(lines) and need to assign the particular datapoint to it so that we can color code the same based on the alerts recieving. I have not seen any option in LM to include our own graphic template and assign datapoints or the background images to upload and assign datapoints to it.

2
mnagel
Atomic Advisor
2 years ago
C
Cobot Collaborator
Cole McDonaldCobot Collaborator
posted in Product Discussions

SDT Rest API question...

From the Device perspective, what do the three(?) elements of the sdtstatus mean?  Looking at a device, I see "none-none-none" or something like "none-SDT-none" where one of the elements is replaced with SDT.  @Sarah Terry?

3
C
Cobot Collaborator
2 years ago
S
SmokinIndo
posted in Product Discussions

How to post an API key on a header with the post() method using Groovy?

  I'm trying to write a script in Groovy that makes an API request to check the status of VPN tunnels. I've been trying the implement the post() method from the HTTP library to update the header of the url with the API key. I keep running into an error "no signature on method". This is my code so far. import com.santaba.agent.groovyapi.http.*; ip = "api-mp.meraki.com"; httpClient = HTTP.open(ip, 443); url = "https://"+ip+"/api/v1/organizations/999999/appliance/vpn/statuses"; def postResponse = httpClient.post(url,["X-Cisco-Meraki-API-Key":"ApiKey"]); I just followed the example from this tutorial: https://www.logicmonitor.com/support/terminology-syntax/scripting-support/access-a-website-from-groovy I'm wondering if I'm getting the error because I'm not inserting a payload in my method. But I don't have a payload... I'm just trying to update the header.

2
A
2 years ago
Vitor Santos
Vitor Santos
posted in Product Discussions

Office 365 'tenantname' property doesn't work with the actual tenant name

Hello, This is something we've noticed a while ago, but, only sharing now since I forgot in the meanwhile. When adding MS Office 365 env. into monitoring following the official documentation, at some point it's stated that one of the properties that should be set at the resource level is: I've done this but, the property source for Office365Reports category fails when running (prop. source details below): The actual error states the 'tenant name' in context doesn't exist. This gets solved if instead of using the tenant name we pass the tenant ID instead. Just want to raise this to your attention to make sure if the documentation actually requires an update note or no. Thank you! Regards,

1
Vitor Santos
2 years ago
S
Strebowski
posted in Product Discussions

Monitoring Bandwidth Utilization - Firepower FTD's

I'm trying to figure out how to monitor the bandwidth utilization on two FTD's we have in LogicMonitor. The interfaces that get polled via SNMP primarily shows a Gigabit NIC followed by some tap interfaces such as tap0 & tap0.1. The interfaces don't line up with what we're seeing in the Firepower Management Center GUI. Does anyone have any ideas as to how this could be monitored? 

1
M
Neophyte
2 years ago
A
ArronC
posted in Product Discussions

Tegile IntelliFlash

Evening all, Has anyone got Tegile monitoring working? I've 2 controllers added in as devices into LM, SNMP string correctly configured, Collectors IP address added into the Tegile SNMP Trap list etc. When looking at raw data i get NO DATA, other then random times ill get a response back with data. When doing a Poll No, it says its time out, other then the odd occasion where it passes once, then fails again. Is this how things should be for a tegile? Or should it work like other SNMP devices where i get a response back every single time? Thank you :)

5
Vitor Santos
2 years ago
P
Pooja
posted in Product Discussions

How to monitor opensource elasticsearch in Logic Monitor

Hello All, I have installed opensource(Not AWS) elasticsearch on my servers. Now I want to monitor the elasticsearch parameters in Logic Monitor. How can i do that? Are there any plugins available to monitor elasticsearch in LM. I found an article for monitoring AWS Elasticsearch through Cloudwatch , but nothing other than that. Any help would be greatly appreciated. Thanks in advance!!

3
A
2 years ago
S
SenthilK
posted in Product Discussions

AWS DirectConnect Virtual Interface

Hi, I am trying to create a custom Datasource to monitor the AWS DirectConnect Virtual Interface bandwidth by cloning the existing "AWS_DirectConnect" DS. I modifed one of the datapoints with following cloud metric path updated. I have manually added VirtualInterfaceID as property in the Direct connect instance. AWS/DX>VirtualInterfaceId:##VirtualInterfaceID##>VirtualInterfaceBpsEgress>Average But I keep getting Empty data, please let me know if I am making any apparent mistake here.   Thank you

4
Andrey Kitsen
2 years ago
DanB
Cybernetic Observer
DanBCybernetic Observer
posted in Product Discussions

What permissions needed for ssh user on Linux boxes to monitor

So as a test we created a new user on a linux box and specified this user on the properties of the linux system (ssh.user/ssh.pass) Forced a Active Discovery and DS re-match and its been 1hr so far and its still under "minimal monitoring".  We don't want to use snmp, so for ssh only systems what are the required permissions needed for ssh to work? Does the user have to be part of the root group?  Was looking at this page: https://www.logicmonitor.com/support/monitoring/os-virtualization/linux-via-ssh-monitoring but there is no mention of permissions needed on the user.

6
DanB
Cybernetic Observer
2 years ago
J
Jeet_G
posted in Product Discussions

NAS - Network Attached Storage monitoring

Is there a document or any article related to monitoring NAS in LM?

2
Michael Rodrigues
LMer
2 years ago
V
VKY
posted in Product Discussions

Metrics data API

Team Is there an API to collect metrics data from logic monitor Get API metrics ===> Third party platform for analysis and reporting. Regards VKY    

1
A
2 years ago
D
Hypersonic Enthusiast
DominiqueHypersonic Enthusiast
posted in Product Discussions

Add the Friendly Name of a certificate on an Alert Report

Hello, I have the discovery: Quote ##--------------- Discovery ------------------## $pshost = Get-Host              # Get the PowerShell Host. $pswindow = $pshost.UI.RawUI    # Get the PowerShell Host's UI. $newsize = $pswindow.BufferSize # Get the UI's current Buffer Size. $newsize.width = 800            # Set the new buffer's width to 800 columns. $pswindow.buffersize = $newsize # Set the new Buffer Size as active. $newsize = $pswindow.windowsize # Get the UI's current Window Size. $newsize.width = 800            # Set the new Window Width to 800 columns. $pswindow.windowsize = $newsize # Set the new Window Size as active. $readOnly     = [System.Security.Cryptography.X509Certificates.OpenFlags]"ReadOnly" $localMachine = [System.Security.Cryptography.X509Certificates.StoreLocation]"LocalMachine" $store        = new-object System.Security.Cryptography.X509Certificates.X509Store( "\\##SYSTEM.SYSNAME##\my", $l

8
D
Hypersonic Enthusiast
2 years ago
B
bmetcalf
posted in Product Discussions

Report showing datasources/datapoints with critical threshold

It doesn't look like there is a canned report for this and something could be written against the  API I'm sure,  but I'm looking for a way to report on all datasources and datapoints where a critical threshold has been set.  We are essentially trying to determine all datapoints where an alert would route through a particular escalation chain.  Any thoughts on this?  Thanks.

1
mnagel
Atomic Advisor
2 years ago
J
Jeffrey.Young
posted in Product Discussions

Send Notification for SSH Session

Good afternoon all!  Does anyone know of a way to send a notification when a SSH session is started to a Cisco switch?  Ideally the notification would be limited to a particular user...so when user X connects a notification is sent.   Thanks! Jeff

1
A
2 years ago
D
Hypersonic Enthusiast
DominiqueHypersonic Enthusiast
posted in Product Discussions

Access Certificate

Hello, What does this error mean? I am trying to collect the information using the "_SSL Certificates Datasource" Quote ##--------------- Discovery ------------------## $pshost = Get-Host              # Get the PowerShell Host. $pswindow = $pshost.UI.RawUI    # Get the PowerShell Host's UI. $newsize = $pswindow.BufferSize # Get the UI's current Buffer Size. $newsize.width = 800            # Set the new buffer's width to 800 columns. $pswindow.buffersize = $newsize # Set the new Buffer Size as active. $newsize = $pswindow.windowsize # Get the UI's current Window Size. $newsize.width = 800            # Set the new Window Width to 800 columns. $pswindow.windowsize = $newsize # Set the new Window Size as active. $readOnly     = [System.Security.Cryptography.X509Certificates.OpenFlags]"ReadOnly" $localMachine = [System.Security.Cryptography.X509Certificates.StoreLocation]"LocalMachine" $store        = new-obj

1
A
2 years ago
D
Hypersonic Enthusiast
DominiqueHypersonic Enthusiast
posted in Product Discussions

How to get the Certificate Common Name (FQDN) in the alerts description

Hello, I am using the two script from Cole McDonald: On 8/22/2019 at 9:11 AM, Cole McDonald said: I've lightened the load slightly on the winCertCheck (which is technically no longer the same DS as I've replaced the entirety of the scripts with simplified .NET based powershell scripts to avoid using invoke-command which tends to lead to some resource constraint issues.  This should help though, will keep the same instances alive from the old code as the output is identical to the previous version by @Jonathan Arnold: ##--------------- Discovery ------------------## $readOnly = [System.Security.Cryptography.X509Certificates.OpenFlags]"ReadOnly" $localMachine = [System.Security.Cryptography.X509Certificates.StoreLocation]"LocalMachine" $store = new-object System.Security.Cryptography.X509Certificates.X509Store( "\\##SYSTEM.SYSNAME##\root", $localMachine ) $store.Open( $readOnly ) $store.Certificates ` | Select-Object {$_.Thumbprint + "##" + $_.Thumbprin

25
D
Hypersonic Enthusiast
2 years ago
P
PeterMattsson
posted in Product Discussions

Custom HTTP Integrations and refresh/update oauth2 tokens

Hi, Has anyone been faced with trying to create a custom http integration towards a system that need to refresh oauth2 tokens to be able to connect. The same way you need to refresh the tokens for Logic Monitor when connecting.

3
R
Neophyte
2 years ago

Badge winners

Show all
Terms & ConditionsCookie settings