Cisco Nexus configsource not quite working | Product Discussions

markinnz · 2023-11-30T08:24:48Z

Hi,First post here and of course it’s a question :-)I’m just trying out configuring the configsource for a Cisco MDS SAN switch (using the Cisco_NXOS config source)It does connect to the switch and it does pull “some” info out, but not all.The instructions of what to configure in the configsource are a tad vague, in the technical notes it lists what it wants :- requires ssh access via credentials set in ssh.user and ssh.pass- user set in ssh.user must have the following privileges: - terminal length * - show * - readSSH user and pass all easy, creating the role though … I can create a role with the feature “show *”, no idea what feature “read” is or how to give the role “terminal length *”The issue of it getting only a small amount of data is almost certainly related to the “terminal length *” requirement, by default switches give you a page at a time on screen and you tend to do a “term len 0" to get it to output it all non-stop.Anyone use this configsource ? And could share the role created on the switch ?Thanks!

MoreDiscussions

Cisco Nexus configsource not quite working | Product Discussions | LogicMonitor Community