BGP Description | Feature Requests | LogicMonitor Community

Peter_Meijer · 2024-03-07T07:30:25Z

The Datasource BGP- shows per BGP instance a Description based on snmp OID 1.3.6.1.2.1.15.3.1.1 which is the bgp peer identifier.That is not the actual description that's configured in the switch.Here is an example of BGP configurations.address-family ipv4 vrf t01-WANbgp router-id 11.226.11.2network 10.251.0.0 mask 255.255.255.0network 10.251.1.0 mask 255.255.255.0network 10.251.2.0 mask 255.255.255.0neighbor 10.228.3.53 remote-as 65500neighbor 10.228.3.53 description t01 wan koppeling naar rack z1.3.23neighbor 10.228.3.53 password ***********neighbor 10.228.3.53 activateneighbor 10.228.3.53 soft-reconfiguration inboundneighbor 10.228.3.53 prefix-list t01-WAN-IP-BLOKKEN outneighbor 10.228.3.53 maximum-prefix 200 50exit-address-familyaddress-family ipv4 vrf a07-GTT-sipbgp router-id 11.226.11.2network 10.100.128.16 mask 255.255.255.240neighbor 10.100.128.1 remote-as 65135neighbor 10.100.128.1 description a07 gtt euro fiberneighbor 10.100.128.1 password *********neighbor 10.100.128.1 activateneighbor 10.100.128.1 send-communityneighbor 10.100.128.1 prefix-list a07-TO-GTT outexit-address-familyA snmpwalk on SNMP OID 1.3.6.1.2.1.15.3 doesn't show the neighbor description.How can we get the bgp neighbor description into the LogicMonitor BGP instance description ?

MoreDiscussions