VMWare Basics PropertySource (no SNMP required) | Archive

MrTK · 2019-01-30T23:37:41Z

Problem When we onboard ESXi hosts we use esx.user/esx.pass, we do not configure SNMP on our hosts. We found that details about the host hardware and esx were not getting populated. Checked with support and they confirmed that LM uses SNMP to pull that information. Solution Wrote a PropertySource which uses the ESXi API (esx.user/esx.pass must be set), to pull the information. I used an existing LM DataSource as the basis for the script. E7T2C7

MoreDiscussions

VMWare Basics PropertySource (no SNMP required) | Archive | LogicMonitor Community