Locked
Discussion interactions are currently paused.
HSRP state monitoring on Cisco l3 devices
It would be nice to have visibility into HSRP state for Cisco layer 3 devices such as routers and switches. It should work similar to the BGP datasource I imagine.
I've attempted this with snmp traps but looks like we can't currently filter / alert on arbitrary strings contained in the trap message.
jyoo
Posted 8 years ago·Last reply 8 years ago
3 comments
jyoo
OP8 years agolmLocation: GFYG4T
jyoo
OP8 years agoI've created a test DS which polls current state (1-6) from devices and will alert if the delta is larger than 0. This works however the alert will clear automatically after x number of consecutive polls since it looks at the delta vs previous datapoint. Wondering if there's a better way to do this.
here's the OID - .1.3.6.1.4.1.9.9.106.1.2.1.1.15.##WILDVALUE##
mnagel
·8 years agoThere is a MIB, so should be reasonably straightforward -- surprised it is not already there, but I see no matches for hsrp or vrrp in the DS list :(.
http://www.oidview.com/mibs/9/CISCO-HSRP-MIB.html Now I feel like I gotta try to get that working....