Customized Juniper Interface datasources | Archive

Michael Dieter · 2017-02-22T19:37:36Z

I've published these customized interface datasources for use with Juniper Networks' switches and routers. Combined with additional snmp configuration of the devices, these have helped make Juniper devices a little easier to deal with. I think there is much room for additional customization to permit further grouping. NOTES: in all three the Collection schedule is unchanged but the Discovery period has been reduced to the minimum (10 minutes), which may not be necessary for all use-cases/environments. none of the default datapoints (normal and complex) were removed or edited in any way "snmp64_If_juniper_VCP_interfaces" does not capture every single VCP port in VC larger than 2 members. Additional investigation is needed to understand how Juniper makes VCP accessible via snmp, and whether or not it is possible to discover and monitor every such instance. snmp64_If_juniper_logical: MM6C96 snmp64_If_juniper_physical: WZ2AZC snmp64_If_juniper_VCP_interfaces: YZ42H7

MoreDiscussions

Customized Juniper Interface datasources | Archive | LogicMonitor Community